6
Other functions:
GPS coordinates view (optional)
- allows to display GPS position within the video. Location is display in the form of coordinates.
Current speed view (optional)
- allows to display current speed within the video, usable for future reference.
Video lock
- can be used to lock the video from subsequent overwriting by another video in the future. You can lock the videos
either in the recording mode or in the playback mode.
Important functions:
Motion detection
Automatically begins recording when the camera detects sufficient motion, for example, when reversiing. The
amount of motion needed to begin recording depends on the level of motion senstivity selected. Be careful when
selecting high sensitivity as this may quickly ll up the memory card.
Loop settings
Loop recording allows the car camera to continuously record regardless of the memory card capacity. You can
choose from four time intervals: Off / 2 min / 3 min / 5 min. The selected interval determines how long the camera
will record for and save. The advantage of this setup is that you will never run out of space on your memory card.
Moreover, it is much easier to send small les e.g. an E-mail for use as evidence.
Delay On / Off
This function is used to delay turning the camera on or off when the car engine is turned on or off. This can increase
the free space on the memnory card (when there is a switch on delay) or can provide a record of what happens
when you leave your car (when there is a switch off delay).
To Next Page
Loading...