EQUIPMENT DETAILS
111
WAECO FRIDGE
Operation with batteries
(internal power supply)
Indicator Fault Remedy
(3) and (8)
flashing brightly
Flame not ignited Check gas supply (gas bottle, gas valve)
Press the (8) button after clearing the fault
(3) and (7)
flashing brightly
Burner defective
or cooling unit
defective
Check burner, burner nozzles, if necessary con-
tact Customer Service and arrange replacement
Acoustic signal at
15 second intervals
Undervoltage
detection (internal
batteries)
Replace batteries
Automatic switch-
ing from external
to internal power
supply does not
function (absence
of the onboard 12V
power supply for
the electronics)
Refrigerator does
not function, gas
operation not
possible although
the batteries are
inserted
Switch off the refrigerator and start again
The onboard power supply was interrupted during
the starting of the gas operation
Note: No automatic switching is performed during
the ignition.
Waeco fridge
Before starting your new refrigerator for the first
time, you should clean it inside and outside with
a damp cloth for hygienic reasons (please also
refer to the see ‘Cleaning and care’).
8.1 Energy saving tips
• Allow hot food to cool down first before you
put it in the refrigerator.
• Do not open the refrigerator more often
than necessary.
• Do not leave the door open for longer
than necessary.
• Defrost your refrigerator as soon as a layer of
ice forms.
• Avoid unnecessarily low temperature settings.
• Clean dust and dirt from the condenser at
regular intervals.
8.2 Using the refrigerator
The fridge conserves fresh foodstuffs. The
freezer compartment conserves frozen
foodstuffs and freezes fresh foodstuffs.
Ensure that food or liquids in glass containers
are not excessively cooled. Liquids expand
when they freeze and can thus destroy the
glass containers.Food may only be stored in
its original packaging or in suitable containers.
To Next Page
Loading...
Need help?
General
