Truma DIGITAL TIMER CONTROL User Manual

EQUIPMENT DETAILS
82
Heater
Settable temperature range 5 - 30 °C (1 °C
steps)
a = heater * – Heater is switched on.
Air conditioning unit (not normally fitted)
Settable temperature range 16 - 31 °C (1 °C
steps)
b = cool *
( Air conditioning unit is switched on)
c = auto
(Air conditioning unit is set to automatic)
d = hot
(Air conditioning unit is in heating mod.)
* This symbol will flash until the required room
temperature is reached.
Change the warm water level
• Use the control knob / push button to select
the symbol in menu line (3).
• Click to change to the setting level.
• Use the control knob / push button to select
the required level.
• Click the control knob / push button to
confirm the value.
2
3
a
b
c
d
a = Boiler *
(Warm water boiler is switched on)
b = 40°
(Warm water temperature 40 °C)
c = 60°
(Warm water temperature 60 °C)
d = boost *
(Targeted, fast heating of the content of the
boiler [boiler priority]. The water temperature
is kept at the higher level [around 62 °C] – Not
Combi Diesel. Once the water temperature is
reached, the room is heated again.)
* This symbol will flash until the required water
temperature is reached.
Select power type
• Use the control knob / push button to select
the symbol in menu line (3).
• Click to change to the setting level.
• Use the control knob / push button to select
the required power type.
• Click the control knob / push button to
confirm the value.
2
3
a
b
c
Symbol Operating mode Power type
a Gas Gas
b EL 1 Electro
b + c EL 2 Electro
a + b Mix 1* Gas + Electro
a + b + c Mix 2* Gas + Electro
* Mixed mode
TRUMA DIGITAL TIMER CONTROL

Truma DIGITAL TIMER CONTROL Specifications

General

Brand	Truma
Model	DIGITAL TIMER CONTROL
Category	Controller
Language	English