Truma DuoControl CS - Operation; 4.1 Starting up; 4.2 Resetting the reset button

DuoControl CSOperation
48 EN
50020-00980 ∙ 00 ∙ 08/2022

Connect the gas cylinder and ensure that the hose connection is
in perfect condition�

Open the cylinder valve�

Firmly press the hose rupture protection on the high-pressure
hose for 5seconds if necessary�

Reset the reset button if necessary�
The system is now ready for operation� The gas appliances can be
used�
4.2 Resetting the reset button
Fig� 9
Fig� 10

To reset the gas pressure regulator, press the yellow reset button
with the T20Torx pin of the screw aid in the housing, gently turn
in a clockwise direction and hold for 10 seconds�