Truma iNet X User Manual

6 EN
The connection can be made via the Truma iNet X or via
the mobile device with the help of the App.
– Follow the instructions of the set-up wizard on the screen.
Resetting faults
If a fault occurs in a connected appliance, this is shown on the
Truma iNet X.. Solutions to rectify the fault are suggested in
the display. The fault can then be reset with the Truma iNet X.
Maintenance
The Truma iNet X requires no maintenance. Use a damp,
non-scouring cloth to clean the front panel. If this is not suffi-
cient, use a neutral soap solution.
Disposal
Neither the appliance nor the batteries may be disposed
of with domestic refuse, instead they must be sent for
recycling separately via a collection point. By doing this
you are contributing towards reuse and recycling. National
regulations and laws must be observed.
Technical specifications
Display (touch) TFT-LCD 4.3" (resistive)
Operating temperature
range -30°C to +70°C
Storage temperature
range -30°C to +70°C
Interfaces TIN bus, CI bus, CAN bus
Bluetooth Low Energy (BLE)
Power supply 8V – 16V
Power consumption typ. 1.5 W
Weight approx. 150g
Protection class Class III
Protection type IP 10
Subject to technical changes.

Truma iNet X Specifications

General

Power Supply	12 V DC
Connectivity	Bluetooth
Interfaces	CAN
Compatibility	Truma appliances
Operating Voltage	10.5V to 15V DC