What to do if my Truper COMP-240LV is pumping oil?
If your Truper Air Compressor is pumping oil, it could be due to several reasons. First, the admission filter might be blocked, so you should clean it or replace it if necessary. Second, the oil viscosity could be too low, requiring you to change the oil to the right type. Third, the oil level might be too high; if excessive fill-up is possible, remove the excessive oil from the casing.
What to do if my Truper COMP-240LV Air Compressor motor overload is triggered?
If the motor overload is triggered or the compressor consumes excessive current, it could be due to several reasons. The oil viscosity might be too high, so change and use the right type of oil. There may be a tension drop in the feeding line, so check the voltage in the feeding line fuses or correct the motor overload. Deficient energy regulation (unbalanced line) may be the cause, in which case you should consult a qualified electrician.
Why is my Truper Air Compressor running excessively hot?
If your Truper Air Compressor is running excessively hot, it could be that the oil level is too low. Add oil to the casing up to the right level.
What to do if my Truper Air Compressor has excessive starting and stopping?
If your Truper Air Compressor is starting and stopping excessively, it might be necessary to drain the tank. Open the valve set in the lower side of the tank and drain it. Also, air leaks in the pipeline (in the machine or the external system) can cause this issue. Inspect to detect air leaks and use sealing tape in all leaky connections.
Why is the air feed reduced in my Truper COMP-240LV?
If the air feed is reduced in your Truper Air Compressor, it could be due to a clogged admission filter. Clean the filter or replace it if necessary. Another cause could be air leaks in the piping (in the machine or in the external system). Look for air leaks and use sealing tape in all the leaky connections.
Why is my Truper Air Compressor not reaching its speed?
If your Truper Air Compressor is not reaching its speed, voltage drops in the feeding line could be the reason. Double-check the feeding line voltage, the fuses, or correct the motor overload. Another possible cause is deficient energy regulation (unbalanced line), in which case you should consult with a qualified electrician.
Why is my Truper COMP-240LV motor not running?
If the motor of your Truper Air Compressor is not running, it could be due to voltage drops in the feeding line. Double-check the feeding line voltage, the fuses, or correct the motor overload. Another cause could be deficient energy regulation (unbalanced line), so consult with a qualified electrician. Also, check if motor overload has been triggered. Press the thermic button to restart the motor. Furthermore, if the pressure in the tank is higher than the cutting pressure of the switch, the motor will not start until the pressure drops below the cutting pressure.
What causes oxidation in the cylinders of Truper COMP-240LV?
Oxidation in the cylinders of your Truper Air Compressor can be caused by using the wrong type of oil. Change and use the right type of oil.
Why are the lights blinking when my Truper Air Compressor is operating?
If the lights are blinking when your Truper Air Compressor is operating, it could be due to voltage drops in the feeding line. Double-check feeding line voltage, the fuses or correct the motor overload. Another possible cause is deficient energy regulation (unbalanced line), so consult with a qualified electrician.
What causes abnormal piston, worn ring or cylinder in Truper COMP-240LV?
An abnormal piston, worn ring, or cylinder in your Truper Air Compressor can be caused by several factors. The oil viscosity might be too low, so change and use the right type of oil. Also, the oil level might be too low; add oil to the casing up to the right level. A dusty atmosphere can also contribute, so a more effective filter is needed in the air admission.
General| Brand | Truper |
|---|---|
| Model | COMP-240LV |
| Category | Air Compressor |
| Language | English |
To Next Page
