What to do if my Truper COMP-80LV gets excessively hot?
If your Truper Air Compressor is getting excessively hot, turn it off and allow it to cool down before resuming operation. If the problem continues, discharge the air. Also, ensure you are not using extension cables. If the fault persists, it is recommended to go to TASC*.
Why is my Truper Air Compressor generating too little air?
If your Truper Air Compressor generates too little air, start by cleaning or replacing the air filter if it's dirty. Also, make sure the nozzle is closed. If the issue persists, it is recommended to go to TASC*.
What to do if the safety valve is dripping on my Truper COMP-80LV Air Compressor?
If the safety valve of your Truper Air Compressor is dripping, it could be due to excessive pressure. It is recommended to go to TASC*.
How to fix a Truper Air Compressor that will not start with initial pressure?
If your Truper Air Compressor will not start with initial pressure, restore the protector and discharge it. If the issue persists, it is recommended to go to the nearest TASC*.
What to do if my Truper Air Compressor keeps releasing air when stopping use?
If your Truper Air Compressor keeps releasing air when stopping use, it may be due to a defective retention valve. It is recommended to go to the nearest TASC*.
Detailed specifications including model, voltage, power, pressure, flow, and tank capacity.
Warnings and instructions regarding electrical connections, grounding, and avoiding hazards.
Safety precautions and checks to perform before using the air compressor.
Guidelines for safe operation, including ventilation and avoiding hazards.
Solutions for motor not working, buzzing, fuse blowing, or circuit tripping.
General| Brand | Truper |
|---|---|
| Model | COMP-80LV |
| Category | Air Compressor |
| Language | English |
To Next Page
