Trust 14832 - Page 8

USER’S MANUAL
1
Product information
UK
MOUSE
A: Laser
B: Right button
C: Left button
D: Trackball / scroll
E: Third button
F: Laser button
G: Low power indicator
H: Battery compartment
I: Desk sensor
J: Fourth button
K: Fifth button
L: On/Off
M: Recharge cable input
N: ID connect button
CRADLE
O: Mini receiver (removable)
P: ID connect button
Q: Recharge indicator
RECHARGE CABLE
R: Recharge indicator
Batteries
1 (1) Push battery cover. (2) Place batteries. (3) Close cover.
Installation
2 Put mouse in cradle.
3 PC off.
4 Connect USB cable to PC.
5 PC on.
6
Recharge batteries 6 hours.
When indicator green: batteries full.
7 (1) Press connect button receiver. (2) Press connect button mouse.
8 Insert CD-ROM. Click ‘Install driver’.
9 Follow on-screen instructions to finish.
Configuration
10 Double click icon.
11 (1) Click ‘Wheel’. (2) Select ‘Trust Mouse Mode’. (3) Click ‘Apply’.
12 (1) Click ‘Programmable button’. (2) Select mouse button to program.
13
(1) Assign function to button. (3) Click ‘OK’.
Click ‘Help’ for function details.
Travelling
14
Recharge mouse: (1) Connect cable to notebook. (2) Connect cable to mouse.
When indicator green: batteries full.
15
Connection: (1) Pull out mini receiver. (2) Connect receiver to notebook.
Repeat 7 if necessary.
Note