Trust GReddy Profec - Page 36

■ProgrammingtheBoostLimiter■
LIMITER
SET
SET
Boost
Time
WARNINGvalue
0×100kPa
LIMITERisrunning.
■WhileLIMITERisactivated■
LIMITERinoperation
LIMITER
Asafetyfunctiontolowertheboost,oncetheWARNINGboostvalueisexceeded.
Thepercentageboostloweredcanbeprogrammed.
IftheLIMITERisprogrammedto0%,theunitwillnotreduceboost.
OncetheLIMITERisactivatedattheWARNINGboostvalue,it
willcontinuetoreduceboostbytheprogrammed
percentageuntiltheboostpressurefallstonegativepressure
(vacuum).
(1)InaBOOSTmodeset-upscreen,highlightLIMITERand
presstheSETDIALtoconfirm.
(2)RotatetheSETDIALtochangeaLIMITER%toreduce
theboost.
(3)ToprogramtheLIMITER%,presstheSETDIALto
confirmandreturntotheBOOSTmodeset-upscreen.
Modeʼssetupscreen
Modeʼssetupscreen
Boostsettings
OncetheLIMITERisactivatedandtheboostcontrollerwill
attempttoreduceboostbytheprogrammedpercentage.
Whilebeingactivated,thedisplayscreenwillshowa
LIMITERwarningalert.
All manuals and user guides at all-guides.com
all-guides.com