Need help?Do you have a question about the Trust GReddy Profec and is the answer not in the manual?
Lists necessary tools and instruments for installation and pre-installation checks.
Details on routing vacuum hoses for the pressure sensor and connecting the 'Y' joint connector.
Steps for mounting the control unit using the adjustable bracket or double-sided tape.
Configures the Real-time (boost gauge) display's pattern type.
Configures the display's orientation.
Configures the brightness of the display and switch backlighting.
Configures either metric or standard pressure units.
Configures alarm sound patterns for warning and limiter functions.
Configures if the LAST BOOST feature is activated.
Configures the START BOOST program type.
Configures DATA LOCK and password.
Programs the boost pressure by controlling the boost control solenoid valve.
Controls the boost curve tendency after the START pressure value.
Affects the initial boost response, depending on ST.TYPE style.
Displays the peak boost value in memory and allows resetting.
Activates audible and visual alarm if boost pressure exceeds value.
Safety function to lower boost once WARNING value is exceeded.
Enhanced boost feature activated by SET DIAL, momentarily or timed.
Changes PATTERN (DIGIT / BAR / GRAPH) by pressing SELECT and MODE.
Allows changing SET % value by turning SET DIAL.
Resets the displayed PEAK value by pressing and holding MODE.
Checks VALVE operation, DISPLAY test, unit RESET, and Software Version.
Lists necessary tools and instruments for installation and pre-installation checks.
Details on routing vacuum hoses for the pressure sensor and connecting the 'Y' joint connector.
Steps for mounting the control unit using the adjustable bracket or double-sided tape.
Configures the Real-time (boost gauge) display's pattern type.
Configures the display's orientation.
Configures the brightness of the display and switch backlighting.
Configures either metric or standard pressure units.
Configures alarm sound patterns for warning and limiter functions.
Configures if the LAST BOOST feature is activated.
Configures the START BOOST program type.
Configures DATA LOCK and password.
Programs the boost pressure by controlling the boost control solenoid valve.
Controls the boost curve tendency after the START pressure value.
Affects the initial boost response, depending on ST.TYPE style.
Displays the peak boost value in memory and allows resetting.
Activates audible and visual alarm if boost pressure exceeds value.
Safety function to lower boost once WARNING value is exceeded.
Enhanced boost feature activated by SET DIAL, momentarily or timed.
Changes PATTERN (DIGIT / BAR / GRAPH) by pressing SELECT and MODE.
Allows changing SET % value by turning SET DIAL.
Resets the displayed PEAK value by pressing and holding MODE.
Checks VALVE operation, DISPLAY test, unit RESET, and Software Version.
General| Brand | Trust |
|---|---|
| Model | GReddy Profec |
| Category | Automobile Accessories |
| Language | English |
To Next Page