Trust GXT 155 - Detailed Mouse Layout; Profile Indicator LED Color Mapping

GXT 155 Gaming Mouse - USER’S MANUAL
2
Mouse layout
a
b
c
d
e
f
g
h
i
j
- Button 1 (left mouse button)
-
Button 3 (Scroll wheel)
- Scroll wheel LED (Profile indicator)
Yellow
Profile 1
Green
Profile 2
Blue
Profile 3
Purple
Profile 4
Red
Profile 5
-
Button 2 (default function = right mouse click)
-
Button 4 (default function = triple mouse click)
-
Button 5 (default function = DPI+ )
-
Button 6 (default function = DPI-)
-
Side Buttons 7-11
-
Profile switch (not programmable)
- Adjustable weights compartment
I nstallation
1.
a - Insert the Trust CD-ROM into your CD drive.
- Click “Run Setup.exe – Published by Trust International BV”.
b
- Click “Install driver”.
c - Click ‘Finish’ when the installation is completed.
2.
a - Connect the mouse to the USB port of the PC.
b - Wait until the message ‘Your device is ready to use’ appears.
3.
a - Start the mouse configuration software (located in the taskbar).
b
- You can now start to configure the mouse. In the manual will be referred to ‘Apply’ to update the
mouse.
The mouse can store 5 different profiles. You can instantly switch between these profiles by assigning the
profile switch function to one of the 11 buttons, or use the profile switch at the bottom of the mouse.