Trust GXT 180 - Performance and DPI Settings; DPI Configuration; DPI Precision Adjustment; Report Rate Configuration

GXT 180 Gaming Mouse - USER’S MANUAL
2
Report rate & DPI settings
4.
a
b
c
d
e
DPI setting
- Click on the ‘PERFORMANCE’ tab.
- Change the DPI settings by clicking the respective bar.
- Click ‘DPI SETTINGS’ to enter advanced DPI settings.
- Click the switch under the DPI number to enable or disable this DPI level.
- Click on ‘SAVE’ to update the settings to your mouse.
LED colours indicate which DPI level is currently These indication colours cannot be changed;
o RED = Level 1
o GREEN = Level 2
o BLUE = Level 3
o TURQOISE = Level 4
o PURPLE = Level 5
5.
a
b
c
d
Other Settings
-
Change the DPI Precision rate by dragging the respective cursor. DPI precision can be found as
function and can be assigned to a button (see Step 3.).
-
Change the Report Rate by dragging the respective cursor.
-
Change the Acceleration by dragging the respective cursor.
-
Change the scroll speed by dragging the respective cursor.
After assigning the DPI Precision function to a button, press and hold that button to increase the
precision to the selected DPI precision.
DPI Precision is linked to the active DPI level.
Light Settings
6.
a
b
c
d
e
Change the Light Effect
-
Click on the ‘EFFECT’ tab.
-
Change the light mode.
-
Change the breathing speed.
-
Change the brightness level.
-
Select the desired LED color or pick a custom color by dragging the respective cursor.
Light modes;
o Constant = one solid colour
o Breathing = one breathing colour
o Colour shift = demo mode (brightness & colours not adjustable)
o Switch off = disable LED