Trustwave SWG 3000 - Page 16

Secure Web Gateway 11.5 Setup Guide
Copyright © 2013 Trustwave Holdings, Inc. All rights reserved. 16
config_hardware
This command allows the system administrator to configure an installed Caching Kit and/or Bypass NIC.
Note: Caching Kit is relevant to both physical and virtual devices. Bypass NIC is relevant only to physical
devices.
When the command is entered, the screen displays the installation and configuration status of these two
pieces of hardware.
To configure an installed piece of hardware, select the hardware option (Caching Kit or Bypass NIC)
from the menu, and then enter Y to configure it. Select Q to exit.
config_upgrade
After upgrading the Policy Server to a new version, running this command will upgrade the scanners.
config_support
Allows you to install support packages.
config_psweb
Allows you to change the Policy Server management port for enhanced security. To change the Listening
port for the Policy Server, add the new Port settings.
config_exclude
Defines bypass rules in intercepting proxy mode.
config_bridge
Configures intercepting proxy to work in bridge mode. In Bridge mode, only traffic that should be
scanned will be processed. All other traffic will flow uninterrupted.
config_access_log
Enables or disables the access log.
disable_ ...
Disables the service. The disable command includes the disable_service_snmpd and disable_service_ssh
commands.