Trustwave SWG 3000 - Page 19

Secure Web Gateway 11.5 Setup Guide
Copyright © 2013 Trustwave Holdings, Inc. All rights reserved. 19
last
Displays a list of the previous administrators who logged on to the Limited Shell - including those still
logged on.
name2ip
Displays the IP address associated with a given hostname. Enter the name2ip command followed by a
hostname to display the associated IP address.
netstat
This command is a useful tool for checking your network configuration and activity. It displays the status
of network connections on either TCP, UDP, RAW or UNIX sockets to the system.
ping
Use the ping command to check the network connectivity - for example after using netconf.
poweroff
Enables you to remotely shut down the appliance.
IMPORTANT: Physical access to the appliance is needed to bring the system back online for all models
except the 7000-SWG.
reboot
Enables you to remotely reboot the appliance.
restart_role
Restarts all role services.
save_exclude_logs
Saves Exclude logs in the Exclude directory.
save_support_logs
Saves Support logs in the Support directory.