Secure Web Gateway 11.5 Setup Guide
Copyright © 2013 Trustwave Holdings, Inc. All rights reserved. 20
Assists you in setting up the appliance for the first time. It guides you to perform all the necessary steps
to establish a working appliance. You can choose to rerun the setup command to repeat the initial
configuration commands at any time.
Shows system or service status. The show command includes show_bridge, show_config, show_network,
show_service, show_dbsize, show_proxy_buffers, show_proxy_connections, show_route, show_time, and
show_version.
Shows the Bridge role configuration.
Shows the current configuration.
Shows the hardware specs of a given SWG device.
Shows the current network configuration. This includes: defined interfaces, DNS configuration, DNS cache
and current hostname.
Allows system administrators to view the service configuration status.
The following options are available:
• show_service_all: Displays the service configuration status for all the available services.
• show_service_snmpd: Displays the service configuration status for snmpd.
• show_service_ssh: Displays the service configuration status for ssh.
Shows the file size of the data- bases connected with your appliance.
Shows the status of proxy buffers.
To Next Page