1. PRECAUTIONS
Avoid installing the scale in direct sunlight, which may cause discoloration.
Avoid overloading that could cause damage to the scale.
If the scale is not to be used for a long period of time, remove all batteries from
the battery compartment to avoid leakage.
Avoid stack materials on the scales, when scale is not in use.
Avoid unsuitable tables. The tables or floor must be rigid and not vibrate. Do
not place near vibrating machinery.
Avoid unstable power sources. Do not use near large users of electricity such
as welding equipment or large motors.
Do not mix the type of batteries. Replace all the batteries at the same time.
Only use original S29 adaptor, other could cause damage to the scale.
When the scale is used with an adaptor, the does not conform to IP-67
protection.
IP 6 7
Protected against immersion of water:
Protected against entry of dust
IPCode (International Protection Rating) of IEC 60529
To Next Page
Loading...
