TScale s29 series - Parameter Settings; Accessing the Parameter Menu

S29 Series Technical Manual
- 9 -
5. PARAMETERS
Enter the Menu
 Turn on the scale. Press during that start up until display will be shown
Enter the Selected Menu
 Press , it can confirm which will be shown displayed.
Select the Menu
 Press , it can choose menu block one by one.
Menu
Description
F1 cal
Calibration
F2 res
3 000
Set Resolution
6000
dual
F3 cap
3 kg
Set Scale Capacity
6 kg
15 kg
3 0 kg
F4 inp
Internal Counts
F5 0ff
Set automatic turn off the scale
3 min
Scale will be auto off three minutes later
5 min
Scale will be auto off five minutes later
15 min
Scale will be auto off 15 minutes later
off
Auto off function disable
Back
Back to weighing mode
F1C al