TSI Instruments AEROTRAK 9310 - To Use AC Power; Using the Stylus

2-6 AeroTrak
®
Portable Airborne Particle Counter
To Use AC Power
Connect the country-appropriate power cord to the external power
supply. Next connect the 24 VDC connector to the socket in the particle
counter and then connect the other end to an AC outlet.
W A R N I N G
The instrument turns on automatically when the AC power supply is
plugged in.
Using t h e Stylu s
This particle counter is shipped with a plastic stylus for use with the touch
screen interface. Use your fingertip or the stylus only. Do not use sharp
objects, such as pens or pencils on the touch screen as they may
damage it.
Power
Entry