Getting Started 2-11
Using C o m municatio n s Por ts
USB B
The standard USB B connector is used to connect the instrument to a
computer running TSI TrakPro™ Lite Secure software for data
downloading and analysis. It is used with a standard USB cable and
TrakPro Lite Secure Software (both included).
Ethernet Port
The particle counter is compatible with either 10 or 100 MBps systems.
The green LED indicates that the network is connected. The yellow LED
indicates activity on the network cable. The instrument cannot be
operated using power-over-Ethernet (POE).
The Ethernet LAN connector is a standard 10/100 Mbps 8-Position
8-Contact (8P8C, often called RJ45) modular plug connection.
To Next Page
Loading...
