3-1
C H A P T E R 3
Operation
The AeroTrak
®
Portable Airborne Particle Counter is controlled using a
touch screen display. Use the plastic stylus or your finger tip. DO NOT use
sharp objects (such as a pen point) that may damage the screen overlay.
To turn on the instrument, press the power switch
. After a splash
screen displays the TSI logo, a brief start-up sequence begins as the
Windows
®
CE operating system boots up.
The instrument is ready for operation when the main tab (shown below)
appears. If an optional temperature/humidity probe is attached, those
values will be shown in the upper-left white area also.
The printer icon will come on when sampling is started.
To Next Page
Loading...
