3-38 AeroTrak
®
Portable Airborne Particle Counter
4. To select data by range or sample index instead, tap the Select by
Record button at the bottom.
5. The “Select by Record” screen above allows you to select data by
range of sample index number. Tap the Select Range radio button
and select the lower and upper sample index numbers. To select
data by zone instead, tap the Select by Zone button at the bottom.
6. To filter the data by start and/or end date, check the appropriate
checkboxes and select the date.
7. Check “Recipe” to include the details of each recipe used by samples
that are included in the report.
8. Once you have identified the records or zone to print, press the
Print… button.
To Next Page
Loading...
