Need help?Do you have a question about the TSI Instruments PORTACOUNT 8040 and is the answer not in the manual?
General| Brand | TSI Instruments |
|---|---|
| Model | PORTACOUNT 8040 |
| Category | Test Equipment |
| Language | English |
Explains the two primary reasons for respirator fit testing: verification of training and sizing.
Details the importance of training the trainer and respirator training.
Lists and describes the components included with the PortaCount Fit Testers.
Provides instructions on connecting the twin tube assembly to the PortaCount Fit Tester's inlet fittings.
Details the procedure for saturating the wick with isopropyl alcohol for accurate measurements.
Explains how to connect the PortaCount Fit Tester to a tablet or computer using a USB cable.
Details how to connect the instrument to an AC power source and power it on/off.
Guides on launching and connecting to the FitPro Ultra Fit Test Software.
Describes how to configure the PortaCount Fit Tester for wireless communication via a Wi-Fi USB-A dongle.
Introduces the main menu of the FitPro Ultra software and its options.
Describes how to work with your PortaCount Fit Tester via the software.
Enables viewing, adding, editing, or deleting fit test subjects from the program.
Allows viewing, adding, editing, or deleting respirator information.
Provides access to basic report types like people, respirator, and fit test reports.
Introduces features for viewing fit test records and printing multiple respirators on one card.
Checks if the instrument is working and ambient particle concentration is sufficient.
Verifies the N95-Companion Technology Classifier functionality.
Ensures there are no leaks in the system by attaching a HEPA filter.
Determines the instrument's ability to measure high fit factors.
Provides a quick method for viewing and searching daily check records.
Allows subjects to experiment with adjustments and observe fit effects in real time.
Measures particle concentration in the fit testing area for preparation.
Discusses precautions like avoiding smoking, generated aerosols, and irritant smoke.
Covers fit testing methods and types of respirators.
Explains the use of respirators modified with sampling ports for fit testing.
Details testing disposable respirators by inserting a test probe.
Guides on installing a sampling port onto a disposable filtering-facepiece respirator.
Provides step-by-step instructions for performing a quantitative fit test.
Recommends annual cleaning and recalibration and provides service contact information.
Explains various status messages like 'Low Particle' and 'High Concentration'.
Provides guidance on safely transporting and storing the PortaCount Fit Tester.
Details when and how to change the alcohol wick in the cartridge.
Discusses challenges and recommendations for operating in high humidity environments.
Provides procedures for clearing a clogged internal nozzle.
Lists common symptoms, causes, and solutions for PortaCount Fit Tester problems.
To Next Page
