FitPro Ultra Fit Test Software Operation 29
Change user, protocol, or respirator after you have already
assigned a person to start a fit test.
The PortaCount Fit Tester’s communication method is always
displayed with a USB or a Wi-Fi symbol.
FitPro Ultra Software may display a status icon . If this icon
appears, click on it to display messages and alerts about the system.
The icon is displayed only when measurements are taking place.
When the status is good the icon will not display. For more
information, see Chapter 7.
People
Select People from the Main Menu to view the list of fit test subjects
that are stored in the program. People are listed alphabetically. You
can sort them by ID number if desired, or use a filter such as first or
last name, company, location, etc.
From this screen you can also delete a person , edit information
about the person , or display the information already collected
about the person . By selecting , a person info screen is shown.
Click Active to make a person active or inactive. If a person is
inactive they are excluded from selection during fit testing. Inactive
people are still included in reports of historical fit tests.
To add a person, click NEW and fill in the required and optional
information.
Respirators
Select Respirators from the Main Menu to view the list of respirators
that are stored in the program. Respirators are listed alphabetically.
To Next Page
Loading...
Need help?
General
