Sonic Belt Tension Meter
BDTM201
Operation Manual
Contents
6-1 How to input the unit mass
6-2 How to input the belt width or the number of belts (ribs)
6-3 How to input the value of span length
1. Precautions P1
7. Unit mass table of the
preinstalled belt
P10
P32. Brief summary, caution & check
points for the failure
8.
Unit mass table of TSUBAKI
tooth shape timing belt
P10
P43. Measurement principle of BDTM201 9. The installation tension table of
the TSUBAKI timing belts
P11
P54. Explanation of the parts of BDTM201
main body
10. Speciļ¬cation of BDTM201
P12
11. Guarantee & Repair Guidelines
P12
P75. Operation procedure of BDTM201
P96. How to input the data
This manual describes operation procedure of BDTM201.
Please read this manual thoroughly before for full use of functions.
Website
https://www.tsubakimoto.com
The logos, brand names, or product names in this operation manual are trademarks or registered trademarks of
Tsubakimoto Chain Co. in Japan and other countries.
Headguarters
3-3-3 Nakanoshima, Kita-ku, Osaka 530-0005 Japan
To Next Page
Need help?
General
