1
Danger
■ Please read this precautions carefully. And Keep this manual
safe for future reference.
■ These precautions are written to defend the user to keep
other people from harm, and to prevent other damages.
Please pay attention to these precautions.
■ These signs indicate the level of danger which can be
expected by improper use.
1. Precautions
Imminently dangerous
situation, such as death
or severe injury
Warning
Can cause break down,
injury, and electric shock
Caution
Injury or physical damages
Things the user must NOT do.
Things the user must do.
Avoid keeping at the place where
much humidity, dust and high
temperature are present.
●Can cause the break down
Do not leave or use this sensor
in the direct sunlight or high
temperature place.
Do not put on an unstable place
like a sloping table.
●Can cause injury or breakdown
Please measure the tensile force
after confirming the machine has
been turned off.
Do not make strong impact or throw.
●Can cause breakdown and fire
Do not use this in a flammable
environment.
●Can cause an explosion or the fire
when using this near propane gas
or gasoline
Do not break down or change.
● Can cause injury
Even though the arm part of the
flexible arm sensor (standard) is a
flexible pipe, do not bend it at an
acute angle.Please do not bend it
close to the head of the sensor
(within 20mm from the sensor),
and also do not bend it at the
bottom of the sensor. For a cord
sensor, do not grab or twirl the
sensor or cord parts strongly.
Please turn off the power,
immediately right after you hear
a thunder noise and move to a
safety place.
●Can cause an electric shock
Do not put liquids such as water
or solvents on the meter. Do not
use the sensor in a wet or oily
environment.
Do not use solvents (thinner and
benzene, etc.) for maintenance.
Warning
To Next Page
Loading...