7
5. CHLORINATORS, BROMINATORS AND OTHER AUTOMATIC SYSTEMS
5.1 Basic connections, inline chlorinator or brominator
This connection is mandatory to ensure the long working life of your pool heat pump.
Any automatic distribution system for chemicals, chlorine, bromine or other, must be installed so that
the distribution system’s water output is located after the pool’s heat pump. The heat pump’s warranty
will be void if the installation is not compliant to this rule.
5.2 Salt chlorinators
Salt chlorinators are made to be installed as inline chlorinators. Therefore, they must be installed as
prescribed in the section above (“inline chlorinator or brominator”).
5.3 Pressurized chlorinator or brominator
Pressurized chlorinators or brominators start by using a small quantity of water as it exits the filter, then
add chemicals and forward this highly concentrated solution into the pool. Check valves must therefore
be extremely resistant to corrosion. Only use the valves that have been supplied or recommended by
the manufacturer of your chlorinator or brominator.
To Next Page
