11
4. Timer on and off
A. Press set timer on. When the indicator light is on and the time is flashing, press again to set hour. Use
or to adjust. Before the flashing stops, press to set minute.
B. Use or to adjust. After adjusting, press and water temperature will been seen.
30 seconds later, the controller display will be back to the normal mode.
C. Press to set timer off. When the indicator light is on and the time is flashing, press
again to set hour. Use or to adjust before flashing stop, press to set minute. Use
or to adjust. After adjusting, press and water temperature will been seen. 30
seconds later, the controller display will be back to the normal mode.
5. Cancel timer on and off
Press or to cancel timer on and off. When the number is flashing, press when timer
indicator light is off and LED shows water temperature, the timer on and off is canceled. 30 seconds
later, the controller display will be back to the normal mode.
To Next Page
