10
V. OPERATION INSTRUCTION
1． Operation Display
a. The display shows Time when the machine is off
b. The display shows Temperature of the swimming pool water when the machine is on.
2． Water temperature setting
a. Press the key or to set water temperature. The controller indicates flashing temp.
b. Press or to adjust to your desired water temp.
c. 5 seconds later, the controller display will back to the normal mode.
d. Switching between F° and C°, hold for 10 seconds
3. Time setting
a. Available no matter whether the machine is on or off.
b. Press key to set time，when the clock on the screen is flashing, press again to set hour.
Use or to adjust hour. Before the flashing stops, press to set minute. Use
or to adjust. After adjusting，press and water temperature will be displayed. 30 seconds
later，the controller display will be back to the normal mode.
To Next Page
