Pool heat pumps normally operate with a 1.4 bar (20 PSI) water pressure.
The maximum operating water pressure is 2.0 bars (30 PSI). Failure to
respect the prescribed water pressures will void the warranty of your heat
pump.
CHLORINATORS, BROMINATORS AND OTHER AUTOMATIC SYSTEMS
BASIC CONNECTIONS, INLINE CHLORINATOR OR BROMINATOR
This connection is mandatory to ensure the long working life of your pool heat pump.
Any automatic distribution system for chemicals, chlorine, bromine or other, must be installed so that the distribution
system’s water output is located after the pool’s heat pump. The heat pump’s warranty will be void if the installation is
not compliant to this rule.
To Next Page
Loading...
