Need help?Do you have a question about the TTI TSX Series and is the answer not in the manual?
Details compliance with EMC Directive 2004/108/EC and related standards for emissions and immunity.
Mentions EN61010-1 Installation Category II and Pollution Degree 2 requirements.
Details voltage, current, settings, mode, terminals, sensing, impedance, and protection.
Details RS232 and GPIB interface options and their configurations.
Covers grounding, live parts, capacitor discharge, and fuse replacement.
Discusses operating environment, condensation, battery replacement, and cleaning.
Lists Radiated, Conducted, and Harmonics test limits for Class B.
Details test methods and performance criteria for ESD, EM Field, Voltage Interrupt, Fast Transient, Surge, and Conducted RF.
Instructions for changing the instrument's mains operating voltage setting.
Details wiring connections for a three-core mains lead and fused plug.
Describes the POWER switch, output terminals, and keyboard layout.
Explains how to set the output voltage using the VOLTS key and numeric keypad.
Details how to set the output current using the AMPS key and numeric keypad.
Covers *CLS, *ESE, *ESR, *IDN, *IST, *LRN, *OPC commands.
Commands to set output voltage and current limit.
Details compliance with EMC Directive 2004/108/EC and related standards for emissions and immunity.
Mentions EN61010-1 Installation Category II and Pollution Degree 2 requirements.
Details voltage, current, settings, mode, terminals, sensing, impedance, and protection.
Details RS232 and GPIB interface options and their configurations.
Covers grounding, live parts, capacitor discharge, and fuse replacement.
Discusses operating environment, condensation, battery replacement, and cleaning.
Lists Radiated, Conducted, and Harmonics test limits for Class B.
Details test methods and performance criteria for ESD, EM Field, Voltage Interrupt, Fast Transient, Surge, and Conducted RF.
Instructions for changing the instrument's mains operating voltage setting.
Details wiring connections for a three-core mains lead and fused plug.
Describes the POWER switch, output terminals, and keyboard layout.
Explains how to set the output voltage using the VOLTS key and numeric keypad.
Details how to set the output current using the AMPS key and numeric keypad.
Covers *CLS, *ESE, *ESR, *IDN, *IST, *LRN, *OPC commands.
Commands to set output voltage and current limit.
General| Brand | TTI |
|---|---|
| Model | TSX Series |
| Category | Power Supply |
| Language | English |
To Next Page
