Loosely Tighten
70%
Loosely tighten all hardware in this step.
DO NOT Fully Tighten. Some component(s)
may need pre-assembly and or alignment
during the assembly process.
Note:
• It is strongly recommended that two people
participate in this assembly step.
• Some parts have been removed for Clarity.
Step 6
Step 6 Assembly List
Item Qty. Description
30 4 HEX HEAD CAP SCREW GR-5 Z/P 3/8-16 X 1 3/4
36 2 HEX HEAD CAP SCREW GR-5 Z/P 3/8-16 X 4
43 12 FLAT WASHER SAE Z/P 3/8"
44 6 NYLON INSERT THIN PATTERN LOCK NUT Z/P 3/8-16
*5 1 TOP FRAME, LEFT SIDE ASSEMBLY
*6 1 TOP FRAME, RIGHT SIDE ASSEMBLY
18 CDP-300 Dual Adjustable Pulley System W/150 lbs Weight Stacks
www.tuffstuffi tness.com
To Next Page
Loading...