Tunturi J660 - Page 4

ASSEMBLY
INSTRUCTIONS
If you need assistance, or
if parts are missing please
call toll free:
Tunturi Technical
Support
1-800-736-7616
STEP 1 MAKE SURE ALL PARTS & HARDWARE KiT ARE PRESENT (FIG. 1
A Electronic Display Hardware Kit, inclu
Safety Tether Key with Cord & Clip
Power Cord
Left Handlebar
Handlebar Bracket Cover-
Right Handlebar with attached Display Base
Hardware Kit, includes the Following:
G 1 — M8 x 80 mm alien screw, flat washer & lock washer
H 1 — M8 x 60mm alien head screw & flat washer
I 1 — M8 x 20mm alien head screw & flat washer
J 1 — 35mm steel bushing
1 — Phillips head screwdriver, (not shown)
1 — 5mm alien wrench, (not shown)
TUNTURI J 6 60 & J 7 70 OWNER'S MANUAL