Need help?Do you have a question about the Tunturi J6F and is the answer not in the manual?
Describes external inputs for heart rate reception and serial communication.
Details internal sensors for speed and inclination, and motor specifications.
Explains how the equipment controls its functions via PWM, DC motors, and displays.
Covers belt motor PWM, lift motor type, displays, LEDs, and buzzer functions.
Describes serial port type, transfer speed, and communication protocol.
Instructions for replacing the console meter, pulse receiver, and membrane.
How to access and navigate the service menu for calibration and settings.
Displays total usage hours and distance.
Procedure to calibrate the lift motor's position and movement.
Option to select the operating voltage (115V or 230V).
Setting the maximum motor speed for the treadmill.
Configuring the meter for different front roller diameters.
Displays the current software version of the treadmill.
Initiates a diagnostic test profile for the treadmill.
Details the transformer's role, specifications, and thermal protection.
Identifies external connections on the electronics module for various components.
Describes connections between the control board and the meter.
Explains the wiring for foldaway and safety switches.
Details the 6-pin cable and color functions connecting to the meter.
Specifies the 8-pin modular connector for serial communication.
Technical information about the lift motor's operation and overload protection.
Details the 8-pin Molex connector and color codes for lift motor signals.
Step-by-step instructions for removing and installing the lift motor.
Procedure to calibrate the lift motor after replacement, referencing the service menu.
Information on the lift arm components and their maintenance.
Steps for removing and reattaching the lift arm.
Details about the lift arm rollers and their locking mechanism.
Overview of treadmill motors, their power, and protections.
Explains the speed sensor, its connector, and LED indicator.
Describes the thermal protector for J8/J8F motors and its absence in J6/J6F.
Information on replacing coal brushes and troubleshooting brush-related issues.
Details overload and thermal protection mechanisms for motors.
Presents a chart of motor wire colors, connectors, and functions.
How to remove the belt wheel and flywheel.
Information on the motor fan's attachment.
Details on the speed sensor's attachment and alignment.
Step-by-step guide to removing the treadmill motor.
Lists common motor problems and their potential causes.
Covers the drive belt system and its maintenance.
Instructions for replacing and adjusting the drive belt tension.
Details on the belt tightener mechanism and its adjustment.
Describes the construction and features of the main frame and foot landings.
Instructions for attaching and replacing the hand rails.
Information on the various plastic covers and their removal.
Details on the dust cover, its material, and removal.
How to remove and reattach the rear roller cover.
Steps to remove the front roller cover.
Describes the material and construction of the rollers.
Information about the durability and maintenance of roller brackets.
Procedures for replacing the front and rear rollers.
Steps to remove and replace the front roller assembly.
Steps to remove and replace the rear roller assembly.
Details the construction and properties of the running deck.
Instructions for flipping or replacing the running deck.
Covers maintenance and adjustment of the running belt.
How to align the running belt using adjustment bolts.
How to identify belt wear and when replacement is needed.
Procedure for adjusting belt tension and replacing the belt.
When and how to re-lubricate the running belt.
Explains the use of lubrication pipes for applying lubricant.
Information on the gas spring used in the foldaway mechanism.
Detailed instructions for replacing the gas spring.
Explains the purpose of error codes in troubleshooting.
Lists error codes related to the drive motor and its functions.
Lists error codes related to EEPROM and data transfer issues.
Lists error codes specifically related to the lift motor.
To Next Page
General
