What to do if my Turbolock Locks doesn't work?
If your Turbolock lock isn't working, first ensure the batteries are properly installed; remove and reinstall them if needed. If that doesn't work, the batteries may be dead. Replace them to restore power. You can also use the emergency power port to power the lock temporarily and open the door, then replace the batteries.
Why can't I open the door with my Turbolock Locks?
There are a couple of reasons why you might not be able to open the door with your Turbolock. It could be that too much time has passed; turn the handle to open the door while the lock’s backlight is still on. Alternatively, your access may be restricted. If you received a key from the lock’s admin, your access may be restricted to certain times of the day. Check with your admin for details.
What to do if I entered the wrong password multiple times on my Turbolock Locks?
If you enter the wrong password five times in a row on your Turbolock, the lock will enter a 5-minute lockout period as a security measure. Wait 5 minutes and try again. Alternatively, you can use the physical key to open the lock directly, overriding the security lockout.
Why is my Turbolock Locks beeping multiple times?
If your Turbolock is beeping multiple times, it's likely a low battery warning. Install new batteries as soon as possible after receiving the first warning, which consists of three sets of triple beeps.
General| Compatibility | Standard doors |
|---|---|
| Keyless Entry | Yes |
| Power Supply/Source | Battery |
| Material | Metal |
| Battery Life | 12 months |
| Door Thickness | 1-3/8" to 2" |
| Operating Temperature | -4°F to 140°F (-20°C to 60°C) |
| Locking Mechanism | Deadbolt |
| Finish | Black |
To Next Page
