user manual
TCS series
tcs manual
page 15
FLYING AND LIFTING
General
A versatile set of rigging parts has been designed for arrayable TCS series enclosures in
order to give the installer a cost effective approach to flying and mounting, ranging from
a single enclosure up to multi-box arrays and clusters.
All riggable products are fitted with metric internal fixings. It is expected that external
parts such as eyenuts, flying bridles, scaffold clamps, safety chains etc. will be obtained
locally from the usual suppliers and used with the parts available from Turbosound.
Any installation, whether temporary or permanent must be securely attached to the
structure of the building using chain, steel wires or web straps which are certified and
load rated for the purpose. The combined weight of the sound system, its cables and the
rigging system must be safely carried by the points at which attachment is made to the
building or structure. Great care must be taken in selecting the attachment points and
methods, being absolutely sure of the load carrying capacity of points chosen.
IMPORTANT NOTE: The rigging of loudspeaker systems is an extremely serious matter
IMPORTANT NOTE: The rigging of loudspeaker systems is an extremely serious matterIMPORTANT NOTE: The rigging of loudspeaker systems is an extremely serious matter
IMPORTANT NOTE: The rigging of loudspeaker systems is an extremely serious matter
with potentially lethal consequences should anything go wrong. It is of vital importance
with potentially lethal consequences should anything go wrong. It is of vital importancewith potentially lethal consequences should anything go wrong. It is of vital importance
with potentially lethal consequences should anything go wrong. It is of vital importance
that you, or other people rigging the system, are suitably qualified to do so and have a
that you, or other people rigging the system, are suitably qualified to do so and have athat you, or other people rigging the system, are suitably qualified to do so and have a
that you, or other people rigging the system, are suitably qualified to do so and have a
full understanding of all the factors involved with safety as a number one priority.
full understanding of all the factors involved with safety as a number one priority.full understanding of all the factors involved with safety as a number one priority.
full understanding of all the factors involved with safety as a number one priority.
Turbosound accept no responsibility for any accident, damage or failure of any rigged
Turbosound accept no responsibility for any accident, damage or failure of any riggedTurbosound accept no responsibility for any accident, damage or failure of any rigged
Turbosound accept no responsibility for any accident, damage or failure of any rigged
system. This rigging information is specifically related to the requirements of the TCS
system. This rigging information is specifically related to the requirements of the TCSsystem. This rigging information is specifically related to the requirements of the TCS
system. This rigging information is specifically related to the requirements of the TCS
series products only. For more detailed information on the whole topic of rigging various
series products only. For more detailed information on the whole topic of rigging variousseries products only. For more detailed information on the whole topic of rigging various
series products only. For more detailed information on the whole topic of rigging various
handbooks are available. If you are in any doubt contact your Turbosound dealer who will
handbooks are available. If you are in any doubt contact your Turbosound dealer who willhandbooks are available. If you are in any doubt contact your Turbosound dealer who will
handbooks are available. If you are in any doubt contact your Turbosound dealer who will
be able to refer you to an experienced rigging company.
be able to refer you to an experienced rigging company.be able to refer you to an experienced rigging company.
be able to refer you to an experienced rigging company.
All the sets and parts have been type tested and will be covered by “certificates of
conformity” as to their ability to safely meet their design specification. These certificates
are available on request.
To Next Page
Loading...
