Inductive angle sensor
with analog output
Ri360P1-DSU35TC-ELi-Exi
Edition • 2016-06-25T06:44:38+02:00
2 / 5 Hans Turck GmbH & Co.KG ñ D-45472 Mülheim an der Ruhr ñ Witzlebenstraße 7 ñ Tel. 0208 4952-0 ñ Fax 0208 4952-264 ñ more@turck.com ñ www.turck.com
Ri-DSU35 for mounting on rotary actuators
The Ri-DSU35 angle sensor and the well-established
Ni4-DSU35 inductive dual sensor are identical in con-
struction. The user also profits from the enormous
mounting flexibility of the device. The sensor can be
mounted on all standard rotary actuators with a shaft di-
ameter of max.14 mm thanks to an extensive range of
available accessories. For larger shaft diameters use
the BTS-DSU35-Z02 accessories.
To Next Page
Loading...
