Inductive angle sensor
with analog output
Ri360P1-DSU35TC-ELi-Exi
Edition • 2016-06-25T06:44:38+02:00
3 / 5 Hans Turck GmbH & Co.KG ñ D-45472 Mülheim an der Ruhr ñ Witzlebenstraße 7 ñ Tel. 0208 4952-0 ñ Fax 0208 4952-264 ñ more@turck.com ñ www.turck.com
Teaching instructions
Teaching with positioning element
Teach pulse LED 1 LED 2
approx. 3 s – start value flashes 1 x, then stop teach pulse => start
value set
approx. 5 s – end value flashes 2 x, then stop teach pulse => end
value set
approx. 8 s - change of direction flashes 3 x, then stop teach pulse => change
of direction CW/CCW
approx. 12 s – factory setting
lights up green, easy teach starts, after com-
pletion fast flash
flashes 4 x, then stop teach pulse => factory
setting reset (360° measuring range, CW di-
rection
To Next Page
Loading...
