Need help?Do you have a question about the turck DR Series and is the answer not in the manual?
General| Brand | turck |
|---|---|
| Model | DR Series |
| Category | Accessories |
| Language | English |
Identifies the intended audience for these instructions.
Defines the meaning of symbols and icons used throughout the manual.
Lists related documentation available for the product.
Provides contact information for submitting suggestions or reporting missing information.
Details how to identify specific models and configurations of the radar sensors.
Lists the items included with the radar distance sensor package.
Outlines the support and resources provided by Turck for product usage.
Specifies the correct applications and purpose of the radar distance sensors.
Highlights improper uses of the device that are not permitted.
Provides essential safety guidelines for handling and operating the device.
Presents a general description of the sensor's physical components and layout.
Explains the function and meaning of the sensor's LEDs and indicator lights.
Details the key technical specifications and characteristics of the sensors.
Explains how the radar distance sensors measure distance using FMCW technology.
Describes the various operational modes and functions available for the sensors.
Outlines the methods available for configuring sensor parameters.
Details the configurations for the sensor's switching output signals.
Describes the configurations for the sensor's analog output signals.
Explains operation and configuration using the IO-Link communication protocol.
Covers operation in Standard I/O mode without IO-Link communication.
Describes the automatic detection of output characteristics like PNP/NPN or analog.
Explains how to adjust signal gain for improved detection of challenging targets.
Lists and describes optional accessories compatible with the sensors.
Provides visual guides for connecting the sensor's electrical interfaces.
Details the steps for enabling and configuring the sensor for IO-Link operation.
Explains how to enable and configure the sensor for Standard I/O operation.
Explains the status indications provided by the sensor's LEDs.
Describes parameter adjustment using physical short-circuiting of pins.
Guides on how to select the desired output type via manual bridging.
Details the procedure for setting a single switching point using manual bridging.
Explains how to set a switching window (two switch points) via manual bridging.
Covers setting the output function (PNP/NPN) using manual bridging.
Provides instructions for restoring the sensor to its default factory configuration.
Explains parameterization and configuration using the IO-Link interface.
Guides on using the Turck Radar Monitor for parameterization and data visualization.
Details how to load the IODD file into the web server for configuration.
Provides an introduction to the Turck Radar Monitor's interface and capabilities.
Explains how to use filters in the Radar Monitor to manage interference signals.
Outlines the procedure and conditions for returning faulty devices to Turck.
States the compliance of the radar sensors with relevant EU directives.
To Next Page
