Inductive angle sensor
with analog output
Ri360P1-DSU35TC-ELi-Exi
Edition • 2016-06-25T06:44:38+02:00
4 / 5 Hans Turck GmbH & Co.KG ñ D-45472 Mülheim an der Ruhr ñ Witzlebenstraße 7 ñ Tel. 0208 4952-0 ñ Fax 0208 4952-264 ñ more@turck.com ñ www.turck.com
Accessories
Type code Ident no. Description
BTS-DSU35-Z01 6900229 Mounting kit dual sensors, for larger rotary actuators: Spac-
er plate and snap ring max. Ø 65 mm; hole pattern on flange
surface 30 x 80 mm (30 x 130 mm); connection shaft (shaft
extension) height 30 mm / Ø max. 30 mm
BTS-DSU35-Z02 6900230 Mounting kit dual sensors, for larger rotary actuators: Ø disc
and snap ring max. 65 mm; hole pattern on flange surface 30
x 80 mm (30 x 130 mm); connection shaft (shaft extension)
height 20 (30) mm / Ø max. 40 mm
BTS-DSU35-Z03 6900231 Mounting kit dual sensors, for larger rotary actuators: Ø disc
and snap ring max.110 mm; hole pattern on flange surface 30
x 130 mm; connection shaft (shaft extension) height 30 mm /
Ø max. 70 mm
BTS-DSU35-Z07 6900403 Mounting kit dual sensors, for larger rotary actuators: Ø disc
and snap ring max.110 mm; hole pattern on flange surface 30
x 130 mm; connection shaft (shaft extension) height 50 mm /
Ø max. 75 mm
IM33-14EX-CDRI 7560015 Isolating transducers; 1-port; power supply of 2-wire measur-
ing transducers with HART® communication as well as con-
nection of active 2-wire and passive 3-wire transmitters, SIL2
according to IEC61508
To Next Page
Loading...
