Product Manual - Turf Tank One+
Installation and Operation
3.4.3 Prepare the Robot
Before you head to the field to set up the Base Station, make sure the Robot is functioning properly. The following
procedures will guide you.
3.4.3.1 Get to Know Your Robot
Familiarize yourself with all the Turf Tank One+ parts, inside and out, as detailed in Product Description - Turf Tank
One+.
3.4.3.2 Check the Antenna
The small UHF Antenna should be affixed to the Antenna Port on the back center metal post of the Robot. If the
Antenna is not there, contact your Turf Tank Representative or Support.
To Next Page
Loading...
