To Next PageTo Next Page
Need help?Do you have a question about the TURFCO 85877 and is the answer not in the manual?
Explains the meaning of DANGER, WARNING, and CAUTION symbols used in the manual.
Provides critical guidance on protecting oneself when handling chemicals and products.
Explains the function and operation of each driving control lever and pedal.
Step-by-step guide for safely starting the T3100 Applicator's engine.
Guides the operator through basic forward and reverse movement of the machine.
Provides instructions on how to effectively steer the applicator during operation.
Warns about operating on inclines and potential hazards.
Provides instructions for safe driving on slopes up to 15 degrees.
Details hazards and limitations when operating on slopes exceeding 15 degrees.
Outlines the step-by-step process for spraying product on the lawn.
Explains the necessity of calibration and the available spreader widths.
Details the initial steps for calibrating the spreader at full speed.
Provides steps to calibrate for an 18/9 foot spread pattern at 4 lbs/1000 sq ft.
Details calibration for a 12/6 foot spread pattern at 4 lbs/1000 sq ft.
Explains the purpose of the adjustable stop for preset gate openings.
Provides detailed steps for adjusting the Vari-Rate Stop for specific settings.
Describes how the Accuway wedge controls material spread balance.
Guides on how to adjust the Accuway for even left-to-right spread.
Explains the need for sprayer calibration for different turf areas and products.
Details how to measure ground speed and product application for calibration.
Step-by-step guide for calibrating the sprayer for large areas (9 ft width).
Step-by-step guide for calibrating the sprayer for smaller areas (6 ft width).
Steps to protect the pump and spray system from freezing during winter.
Lists maintenance tasks based on operating hours (5 to 1000 hours).
Explains the meaning of DANGER, WARNING, and CAUTION symbols used in the manual.
Provides critical guidance on protecting oneself when handling chemicals and products.
Explains the function and operation of each driving control lever and pedal.
Step-by-step guide for safely starting the T3100 Applicator's engine.
Guides the operator through basic forward and reverse movement of the machine.
Provides instructions on how to effectively steer the applicator during operation.
Warns about operating on inclines and potential hazards.
Provides instructions for safe driving on slopes up to 15 degrees.
Details hazards and limitations when operating on slopes exceeding 15 degrees.
Outlines the step-by-step process for spraying product on the lawn.
Explains the necessity of calibration and the available spreader widths.
Details the initial steps for calibrating the spreader at full speed.
Provides steps to calibrate for an 18/9 foot spread pattern at 4 lbs/1000 sq ft.
Details calibration for a 12/6 foot spread pattern at 4 lbs/1000 sq ft.
Explains the purpose of the adjustable stop for preset gate openings.
Provides detailed steps for adjusting the Vari-Rate Stop for specific settings.
Describes how the Accuway wedge controls material spread balance.
Guides on how to adjust the Accuway for even left-to-right spread.
Explains the need for sprayer calibration for different turf areas and products.
Details how to measure ground speed and product application for calibration.
Step-by-step guide for calibrating the sprayer for large areas (9 ft width).
Step-by-step guide for calibrating the sprayer for smaller areas (6 ft width).
Steps to protect the pump and spray system from freezing during winter.
Lists maintenance tasks based on operating hours (5 to 1000 hours).
General| Brand | TURFCO |
|---|---|
| Model | 85877 |
| Category | Paint Sprayer |
| Language | English |
