TURFCO WIDESPIN 1550 - User Manual

TM
Broadcast Top Dresser
OPERATOR’S MANUAL
MAINTENANCE MANUAL
PARTS LIST
TURFCO
®
WIDESPIN
™
1550
Tow Behind No Engine
Broadcast Top Dresser
Electronic Control
Product Number 85824
Starting Serial Number T01201
US Patent 6,149,079, 6,508,419 and 6,817,552
Additional Patents Pending
Manual Number 669320-GB Rev A
DANGER - IF INCORRECTLY USED THIS MACHINE CAN CAUSE SEVERE INJURY.
THOSE WHO USE AND MAINTAIN THIS MACHINE SHOULD BE TRAINED IN ITS
PROPER USE, WARNED OF ITS DANGERS, AND SHOULD READ THE ENTIRE MANUAL
BEFORE ATTEMPTING TO SET-UP, OPERATE OR SERVICE THE MACHINE.
TURFCO MFG. INC.
1655 101st Avenue NE • Minneapolis, Minnesota 55449-4420 USA
Phone (763) 785-1000 • FAX (763) 785-0556
2014 Turfco Mfg., Inc.

Summary

Product Identification and Records

Product Identification

Details on identifying the product number and serial number.

Product Records

Record product number and serial number for ordering parts.

Specifications

Trademarks, Patents, and Service

Mounting Kits

Kits for connecting the top dresser to tow vehicles.

Registered Trademarks and Patents

Lists registered trademarks and applicable patents.

How To Obtain Parts and Service

Contact information for ordering parts and service.

Safety Information

Recognizing Safety Warnings

Explains the meaning of DANGER, WARNING, and CAUTION symbols.

General Safety Practices

Covers training, clothing, hearing protection, and operator awareness.

Machine Safety Precautions

Operation Safety Rules

Safety rules for operating the machine, handling fluids, and general care.

Engine Safety Notes (General)

General safety notes pertaining to engines, applicable if the machine had one.

Setup and Assembly - Initial Steps

Unpacking and Inspection

Guide to unpacking the machine and checking for shipping damage.

Wheel and Tire Installation

Instructions for assembling the wheels and tires to the machine.

Tongue and Hitch Assembly

Spinner Assembly Mounting Bracket

Spinner Assembly Installation

Hopper Assembly - Seals and Panels

Hopper Seal Installation

Installing front and side seals for the hopper assembly.

Hopper Panel Assembly

Assembling the front, rear, and side hopper panels together.

Hopper Assembly - Additional Components

Front Panel and Bracket Installation

Attaching front panel sections and mounting brackets.

Hopper Frame Installation

Hopper Alignment and Controls

Hopper Alignment and Metering Gate

Checking hopper alignment and installing the metering gate.

Hopper Deflector Installation

Installing the hopper deflector (loading fin).

Final Setup Components

Spinner Shield and Display Box Setup

Installing the spinner shield and display box with its cable.

Pre-Operation Checks

Checking tire pressure and operator controls before use.

Description of the WIDESPIN 1550

Broadcast Top Dresser Overview

General description of the Turfco WIDESPIN 1550 broadcast top dresser.

Intended Use and Functionality

Details the intended applications and operational purpose of the machine.

Major Component Identification

Operator Position and Controls Overview

Operator Position and Safety

Defines the correct operator position and safety measures.

Display Box and Screen Navigation

Describes the display box, its screens, and basic operation.

Operator Control Functions

ON;OFF Switch and Function Keys

Explains the ON/OFF switch and the function keys for screen navigation.

Metering Gate, Diverter, and Tilt Controls

Details the operation of the metering gate, diverter, and tilt controls.

Operation - Towing and Speeds

Tow Vehicle and Hitch Requirements

Specifies requirements for the tow vehicle and hitch.

Towing Speeds and Operation Angles

Outlines maximum towing speeds and operating angles.

Operation - Pre-Use Procedures

Operator Position and Pre-Operation Checks

Correct operator position and essential pre-operation checks.

Loading the Hopper Safely

Safe procedures and capacity limits for loading the hopper.

Operation - Spreading Modes

LightSpread and HeavySpread Settings

Instructions for setting up LightSpread and HeavySpread operations.

Operation - Control Settings

Metering Gate and Diverter Adjustments

Detailed steps for setting the metering gate and diverter.

Spinner Wheel Vane Adjustment

Guidance on adjusting spinner wheel vane angles for different spreads.

Display Box Operation and Screens

Display Box Usage and Safety

Proper use of the display box and safety precautions.

Display Box Screens Overview

Description of different screens accessible via the display box.

Display Screen Navigation

Chart and Calculation Screens

Navigating and using the chart and calculation screens.

Unit and Backlight Adjustment

Adjusting units (metric/english) and display backlight.

Adjusting Spinner and Belt Speeds

Preset Speed Settings

Selecting and Saving Presets

Using and saving pre-programmed speed combinations.

Unit Adjustment Screen - Calculation Units

Unit Adjustment Screen - Backlight Value

Using Chart Screen

Application Calculation Screen - Speed Settings

Calculating Spinner Speed

Using the calculator to determine spinner speed settings.

Calculating Belt Speed

Using the calculator to determine conveyor belt speed settings.

Application Calculation Screen - Gate and Area

Calculating Metering Gate Opening

Determining the correct metering gate opening.

Calculating Application Area

Inputting and calculating the area of application.

Top Dressing Operation and Shutdown

Top Dressing Operation Guidance

Best practices for forward speed and turning during operation.

Shutdown and Unhitching Procedures

Steps for safely shutting down and unhitching the machine.

Maintenance and Service - Daily Checks and Storage

Operator Daily Inspection

Routine checks to perform before and after each use.

Storage Procedures

Guidelines for storing the machine for extended periods.

Maintenance - Tires, Lubrication, and Bearings

Tire Pressure and Lubrication

Maintaining correct tire pressure and lubrication points.

Wheel Bearings Service

Procedures for servicing and greasing wheel bearings.

Hydraulic Fluid and Conveyor Belt Care

Hydraulic Fluid Compatibility

Information on hydraulic fluid types and compatibility.

Conveyor Belt Maintenance

Care and cleaning of the conveyor belt and scraper.

Conveyor Belt Tension Adjustment

Conveyor Belt Tracking and Centering

Conveyor Belt Replacement

Adjusting Spinner Wheel Vanes

Removal of the Spinner Assembly

Hydraulic System Overview

Hydraulic Valve Block Components

Description of the hydraulic valve block and its parts.

PF1 Valve and S1 Solenoid

Details of the PF1 valve for spinner motors.

Hydraulic System - Valve Body Details

PF2 Valve and S2 Solenoid

Details of the PF2 valve for the conveyor belt motor.

Hydraulic System - Spinner Motors

Hydraulic System - Conveyor Belt Motor

Electrical System Overview

Main Wiring Harness and Ground

Description of the main wiring harness and ground connections.

Power Input and Fuse Block

Electrical power sources and fuse block information.

Electrical System - Solenoid Wiring

Electrical System - Connector Details

Receiver Box Wiring

Color codes for receiver box wiring connections.

Display Harness Connector

Color codes for display harness wiring connections.

Display Box and Receiver Box Functionality

Display Box and Cable Connections

Connecting the display box and its cable to the system.

Receiver Box Operation and Revision Levels

Functionality of the receiver box and revision level importance.

Parts Lists - Wheels, Tongue, and Lower Frame

Parts Lists - Conveyor Belt and Rollers

Parts Lists - Motor, Scraper, and Mount

Parts Lists - Fenders

Parts Lists - Hopper Assembly

Parts Lists - Spinner Assembly

Parts Lists - Spinner Hydraulic System

Parts Lists - Hydraulic Valve Block

Parts Lists - Hydraulic Hoses

Parts Lists - Electrical System Components

Parts Lists - Display Box Components

Parts Lists - Decals (Diagram)

Parts Lists - Decals (Table)

Optional Trench Filling Attachment Parts

TURFCO WIDESPIN 1550 Specifications

General

Brand	TURFCO
Model	WIDESPIN 1550
Category	Farm Equipment
Language	English