Tuthill Fill-Rite 900 Series

Questions and Answers

B
Brendan HansonAug 13, 2025
Why is my Tuthill Measuring Instruments counter inaccurate?
- J
  Jonathan Blackburn MDAug 14, 2025
  An inaccurate counter in your Tuthill Measuring Instruments may be due to several reasons: * The meter might be mis-calibrated; in that case, check the calibration and recalibrate if needed. * There could be air in the lines or metering chamber; inspect line seals and joints for leaks and seal them. * The measuring gears or disc might be sticking; clean or replace the internal metering components.
M
mhallAug 17, 2025
What to do if my Tuthill Fill-Rite 900 have low flow capacity?
- T
  Timothy GibsonAug 18, 2025
  If your Tuthill Measuring Instruments exhibit low flow capacity, it might be because the meter chamber is clogged. Try cleaning the meter chamber and also clean or replace any screens and filters in the piping.
S
Sandra SmithAug 21, 2025
What to do if my Tuthill Fill-Rite 900 nutating disc is broken?
- T
  timothy32Aug 21, 2025
  If the nutating disc in your Tuthill Measuring Instruments is broken, this may be due to sudden high-pressure fluid hitting the disc. To prevent this, avoid surge flows by installing a shut-off valve on the outlet of the meter. Install the meter as close to the pump as possible, keeping the piping full of liquid. Replace the broken disc.
C
Caitlin RhodesAug 25, 2025
How to fix Tuthill Measuring Instruments meter body cracks?
- J
  John ThomasAug 25, 2025
  Cracks in the meter body of your Tuthill Measuring Instruments can be caused by excess line pressure. Install a pressure relief valve to allow high pressure to bleed back to the tank. You may also need to replace the meter.
E
erik89Aug 28, 2025
How to prevent nutating disc broken in Tuthill Fill-Rite 900 Measuring Instruments?
- C
  charles44Aug 28, 2025
  To prevent a broken nutating disc in Tuthill Measuring Instruments due to sudden high-pressure fluid, install a shut-off valve on the meter's outlet to avoid surge flows. Position the meter as close to the pump as possible and ensure the piping remains full of liquid. If damage has already occurred, replace the meter chamber assembly.
E
emily74Sep 1, 2025
What to do if meter body cracks in Tuthill Fill-Rite 900 Measuring Instruments?
- L
  Lindsey WalkerSep 1, 2025
  If you observe cracks in the meter body of your Tuthill Measuring Instruments, it's likely due to excess line pressure. To resolve this, install a pressure relief valve to bleed high pressure back to the tank. Additionally, replace the meter.
B
btaylorSep 4, 2025
Why is there low flow capacity in Tuthill Measuring Instruments?
- K
  kelly78Sep 5, 2025
  If your Tuthill Measuring Instruments exhibit low flow capacity, it could be due to a clogged meter chamber. Clean the meter chamber thoroughly. Additionally, clean or replace any screens and filters in the piping to ensure optimal flow.
G
gstephensSep 9, 2025
How to fix inaccurate counter in Tuthill Measuring Instruments?
- B
  bakerleahSep 9, 2025
  If the counter on your Tuthill Measuring Instruments is inaccurate, there are several potential causes: * The meter may be mis-calibrated: Check the calibration and recalibrate as necessary. * There may be air in the lines or metering chamber: Inspect line seals and joints for leaks, and seal them appropriately. * The measuring disc could be sticking: Clean or replace the internal metering components as needed.