EasyManua.ls Logo

Tuthill FILL-RITE 900CD - User Manual

Tuthill FILL-RITE 900CD
36 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
1
Digital Liquid Meter
Series 900DB – High Flow
Models
900CD, 900CD1.5, 900CDBSPT, 900CD1.5BSPT
Owners Installation, Operation, and Safety Manual
Tuthill Corporation 8825 Aviation Drive Ft. Wayne, IN 46809 (260) 747-7529 www.tuthill.com

Table of Contents

Questions and Answers

  • N
    nielsenrobertJul 30, 2025
    Why is my Tuthill FILL-RITE 900CD counter inaccurate?
    • N
      nicolezimmermanJul 30, 2025
      An inaccurate counter on your Tuthill Measuring Instruments device can stem from a few reasons. First, the meter might be mis-calibrated, so check its calibration and recalibrate if needed. Second, air in the lines or metering chamber can cause issues; inspect line seals and joints for leaks and seal them. Lastly, a sticking measuring disc can be the culprit; in this case, clean or replace the internal metering components.
  • J
    James WallerAug 8, 2025
    How to fix low flow capacity in Tuthill Measuring Instruments?
    • K
      Kristen ThompsonAug 8, 2025
      Low flow capacity in your Tuthill Measuring Instruments may be due to a clogged meter chamber. Clean the meter chamber and also clean or replace any screens and filters in the piping.
  • T
    Terry NicholsAug 17, 2025
    Why does the meter body crack on Tuthill Measuring Instruments?
    • W
      wnelsonAug 17, 2025
      Cracks in the meter body of your Tuthill Measuring Instruments are often caused by excessive line pressure. To resolve this, install a pressure relief valve to bleed high pressure back to the tank and replace the meter.

Summary

Safety Information

General Safety Precautions

Lists critical safety warnings and precautions for operating the meter.

Fluid Transfer Restrictions

Specifies fluids that cannot be transferred and conditions for specific fluid types.

Installation

Meter Mounting and Orientation

Guides on positioning the meter for correct flow direction and display orientation.

Meter Calibration

Calibration Requirements and Procedure

Outlines when calibration is needed and the general 3-step process.

Entering Calibration Mode

Selecting Units and Dispensing Volume

Entering Dispensed Volume

Completing Calibration

Operating Instructions

Troubleshooting

Common Issues and Solutions

Lists common concerns like inaccurate counts, low flow, and body cracks with possible causes and repairs.

Fluid Compatibility

Compatible Fluids List

Lists fluids that the 900DB series meter is compatible with.

Incompatible Fluids List

Lists fluids that the 900DB series meter is NOT compatible with.

Battery Replacement Warnings

Hazardous Location Battery Change

Warns against changing batteries in flammable atmospheres.

Battery Mixing Prohibition

Advises against mixing old/new or different manufacturer batteries.

Approved Battery Types

Lists specific battery models approved for replacement.

Repair

Safety Testing Approvals

Compliance Standards

Replacement Parts Information

Electrical Installation Information

Battery Replacement Warnings

Repeats warnings about mixing batteries and lists approved types.

Technical Specifications and Information

Physical Dimensions and Accuracy

Provides detailed measurements and accuracy specifications of the meter.

Performance Specifications

Power and Operating Conditions

Approvals and Mounting Options

Certification Information

Applicable Standards

Hazardous Location Markings

Explains the hazardous location classifications and markings on the meter's faceplate.

Tuthill FILL-RITE 900CD Specifications

General IconGeneral
Model900CD
CategoryMeasuring Instruments
MaterialAluminum
ManufacturerTuthill
Power SupplyBattery
FluidsGasoline, Diesel, Kerosene

Related product manuals