TV Logic XVM-245W User Manual

Name & Function of Each Part
[REMOTE] (RJ-45)
- It provides connector to build connection with extra equipment for monitor control.
[DVI-I IN]
- When use our product at DVI display mode, DVI IN is input connector
[RS-232]
- Use to Firmware(Ethernet) & Calibration.
[CVBS1/Y/G/S-Y] (BNC)
- Signal input terminal used to put in COMPOSITE 1, S-VIDEO Y, COMPONENT Y, RGB G signals.
[CVSBS2/Pb/B] (BNC)
- Signal input terminal used to put in COMPOSITE 2, COMPONENT Pb RGB B signals.
[CVSBS3/Pr/R/S-C] (BNC)
- Signal input terminal used to put in COMPOSITE 3, S-VIDEO C, COMPONENT Pr, RGB R signals.
[RS422 IN/OUT] (RJ-45)
- Supports based on attached protocol.
REAR
CVBS1/Y/G/S-Y
CVBS2/Pb/B
CVBS3/Pr/R-S-C
DVI-I
SDI-A
SDI-B
EXT.SYNC
USB
RS232
REMOTE
RS422 IN
RS422 OUT
HDMI(HDCP)
ETHERNET
AUDIO
DC 24V IN
~AC IN
Multi Format LCD Monitor
09

TV Logic XVM-245W Specifications

General

Brand	TV Logic
Model	XVM-245W
Category	Monitor
Language	English