Brightness
This Item controls the degree of brightness.
#Brightness can be adjusted by using the [BRIGHT] control knob on the front of the monitor.
CONTRAST
This item controls the contrast ratio.
#Contrast can be adjusted by using the [CONTRAST] control knob on the front of the monitor.
Image Position
This item controls the position(H/V) of the image in DVI Analog mode.
PHASE
This item controls Phase value.
Clocks/Line
This item is adjust timing for signal sync
Auto Adjustment
This item adjusts the input signal automatically. Phase, Clocks/Line and Image Position are also
adjusted.
To Next Page
Loading...
Need help?
General
