EasyManua.ls Logo

TVS Jupiter - Engine and Transmission Specs; Chassis and Dimensions

TVS Jupiter
69 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
MANUFACTURER : TVS MOTOR COMPANY LIMITED
P.B. No 4, Harita, Hosur - 635 109, India.
TECHNICAL SPECIFICATIONS
ENGINE
Type : Single cylinder, 4 stroke, air
cooled, spark ignition engine
Cylinder bore : 53.5 mm
Stroke : 48.8 mm
Piston displacement : 109.7 cc
Compression ratio : 9.5 : 1
Carburettor : UCAL VM 16 SH
Air filter : Viscous paper filter
Lubrication system : Forced wet sump
Maximum power in kW : 5.88 @ 7500 rpm
Maximum torque in Nm : 8.0 @ 5500 rpm
Maximum speed : Around 78 km / hr
Engine idling rpm* : 1600 + 100 rpm
Starting system : Kick starter / Electric starter
TRANSMISSION
Clutch : Dry - Centrifugal clutch
Primary transmission : CVT (Continuous Variomatic
Transmission)
Primary reduction : 2.38 to 0.82
Final reduction : 10.47
CHASSIS
Dimensions and weight
Overall length : 1834 mm
Overall width : 650 mm
Overall height : 1115 mm
Ground clearance : 150 mm (unladen)
Wheel base : 1275 mm
Steering angle : 90°
Caster angle : 25°
Kerb weight : 107 kg (with tool kit & 90% of
fuel)
Pay load : 130 kg
Maximum laden weight : 237 kg
Frame : Duplex tubular frame
Front suspension : Telescopic hydraulic
Rear suspension : Toggle link, gas filled hydraulic
damper
Trail length : 93 mm
BRAKES
Front : 130 mm dia (hand operated)
Rear : 130 mm dia (hand operated)
-55-
* Under warm condition
TECHNICAL SPECIFICATIONS

Table of Contents

Related product manuals