Spark plug
Remove spark plug using the spark plug
spanner and screw driver given in the tool kit.
Spark plug electrode gap : 0.6 mm
Recommended spark plug BOSCH - UR5DC
It is advisable to tighten the spark plug by hand
till the end and then tighten with the spark plug
spanner.
G
Do not over tighten or cross thread the spark
plug as the aluminium thread of cylinder head will
be damaged.
MAINTENANCE
Clean the spark plug and inspect the
electrode gap. If it is not as per the
specification, adjust to the specified
electrode gap.
Engine oil
Check the engine oil level frequently and
replace it periodically.
Engine oil level check:
1.Park the bike firmly on center stand. If
vehicle is driven recently, allow it to cool for
few minutes so that all oil come back to the
sump.
48