35
First time Bluetooth paring:
To pair your Android smart phone or iPhone with your
TVS Raider 125’s connected instrument cluster, via
Bluetooth, for the first time, follow the procedure as
described below :
1. Switch ‘ON’ the vehicle.
2. Speedometer can be in any mode for first time
pairing.
3. Open the app and press the ‘CONNECT’ tab,
ensure the smart phone is near to the vehicle.
4. The app searches for all Bluetooth devices near
by and displays the list of devices available.
5. The connected instrument cluster’s Bluetooth
name is prefixed by TVSM and followed by
alpha-numeric digits. Ex : ‘TVSRDXXXXXX’. This
Bluetooth name can be found in the speedometer
dial after turning the ignition ‘ON’.
6. Now, select the ‘TVSRDXXXXXX’ in the app to
initiate the pairing process.
7. On pairing, the TFT display of connected
instrument cluster displays a message ‘Bluetooth
device paired’ along with the name of the phone
(if set) for 3 secs.
8. In Addition to this icons, phone’s battery icon
and signal strength icon will be displayed on
connected instrument cluster TFT display.
9. For initiating first time pairing, logout from the
app, login again using your login credentials and
then press ‘CONNECT’.
During the course of pairing process, if there is any
occurrence of error, the connected instrument cluster
should be turned ‘OFF’ and ‘ON’, and the application also
need to be restarted.
Please remember that all the smart phones are not
compatible for pairing with the TVS Raider 125‘s
connected instrument cluster.
During the search of Bluetooth devices in app, if the
vehicle connected instrument cluster’s Bluetooth device
ID is not visible, try for one or two more iterations.
Any number of Android phones can be auto-paired with
the instrument cluster, but only one at any point of time
will be in actively connected with the speedometer.
Only one iPhone can be auto-paired with a single
instrument cluster at a time. If the user need to connect
multiple iPhones with the single instrument cluster,
the previous connected iPhone has to be forgotten by
clicking, ‘Forget This Device’ from Bluetooth settings in
the iPhone.
If the vehicle battery is reset or fuse is blown, then
‘Forget This Device’ from Bluetooth settings.
Note
To Next Page
Loading...
