2019/04/04 16:57 15/36 Torpedo C.A.B. M User's Manual
User's manuals - https://wiki.two-notes.com/
1. Preset number
2. Preset name
3. Simulation (S), Arcade (A) or IR Loader (I) mode indicator
4. Bargraphs for input and output levels
5. Output level (from Mute to +12dB)
In this menu you can navigate in the presets and set the output volume of the unit. You will be in this
menu when playing without editing or modifying any parameter. This way you can have a fast access
to the volume in case you have to quickly lower or increase the volume in any situation.
We recommend first to search for a preset close to the sound you have in mind, then tweak the
selected.
The preset name is limited to 32 letters or numbers. The authorized
characters are capital A to Z, 0 to 9 and space.
4.3 MENU environment
The MENU environment gives you access to the parameters of a preset, allowing you to modify it, or
create your own tone from scratch.
To enter the MENU environment from the PERFORM environment, press either the left (MENU) or the
right (ENTER) button. This will display the top layer of the MENU environment, which lists various
sections you can edit. By entering any section, you'll go down one layer, accessing the parameters of
the preset (or device).
In the MENU environment, the encoders have the following behavior:
turning the left (PARAM) encoder selects the section or parameter you want to edit
turning the right (VALUE) encoder changes the value of the selected section or parameter
pressing on the left (MENU) encoder makes you go back one level in the menu until you come
back to PERFORM environment
To Next Page
Loading...
General